screen /dev/ttyUSBX 115200
U-Boot 2017.09-00048-ge8824042a0-dirty (Oct 07 2021 - 18:03:21 -0400)
Model: Rockchip RK3326 RG351 Series
DRAM: 992 MiB
Sysmem: init
Relocation Offset is: 3dabc000
Using default environment
adc0 (hw rev) 165
Model = rg351mp
RKPARM: Invalid parameter part table
reading rg351mp-kernel.dtb
59133 bytes read in 6 ms (9.4 MiB/s)
I2c speed: 400000Hz
PMIC: RK8170 (on=0x80, off=0x04)
vdd_logic 1100000 uV
vdd_arm 1100000 uV
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: RG351MP for linux based on Rockchip rk3326
dwmmc@ff370000: 1 (SD)
Error: “rkimg_bootdev” not defined
Bootdev: mmc 0
rockchip_get_bootdev: Can’t find dev_desc!
[Vendor ERROR]:Invalid boot device type(0)
rockchip_get_bootdev: Can’t find dev_desc!
[Vendor ERROR]:Invalid boot device type(0)
rockchip_get_bootdev: Can’t find dev_desc!
rockchip_get_boot_mode: dev_desc is NULL!
CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 600000 KHz)
apll 600000 KHz
dpll 664000 KHz
cpll 24000 KHz
npll 1188000 KHz
gpll 1200000 KHz
aclk_bus 200000 KHz
hclk_bus 150000 KHz
pclk_bus 100000 KHz
aclk_peri 200000 KHz
hclk_peri 150000 KHz
pclk_pmu 100000 KHz
** Unable to read file manufacture **
Enable charge animation display
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
Detailed mode clock 29000 kHz, flags[8000000a]
H: 0640 0686 0688 0732
V: 0480 0496 0498 0512
bus_format: 100e
final DSI-Link bandwidth: 192 Mbps x 4
rockchip_get_bootdev: Can’t find dev_desc!
rockchip_get_boot_mode: dev_desc is NULL!
Exit charge: due to charger offline
reading logo.bmp
921656 bytes read in 43 ms (20.4 MiB/s)
switch to partitions #0, OK
mmc1 is current device
Net: Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot(‘CTRL+C’): 0
switch to partitions #0, OK
mmc1 is current device
reading boot.ini
953 bytes read in 2 ms (464.8 KiB/s)
Executing script at 00800800
reading Image
10764296 bytes read in 467 ms (22 MiB/s)
reading uInitrd
13194771 bytes read in 572 ms (22 MiB/s)
reading rk3326-r35s-linux.dtb
90315 bytes read in 9 ms (9.6 MiB/s)
Loading init Ramdisk from Legacy Image at 01100000 …
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 13194707 Bytes = 12.6 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum … OK
Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
‘reserved-memory’ region@110000: addr=110000 size=f0000
Loading Ramdisk to 3101a000, end 31caf5d3 … OK
Loading Device Tree to 0000000031000000, end 00000000310190ca … OK
reserve drm-loader-logo offset = 59776
reserve drm-logo mem = 000000003de00000, size = 3325952
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x40000000 (size: 0x35e00000)
Total: 3560.218 ms
Starting kernel …
[ 0.107054] genirq: Setting trigger mode 8 for irq 170 failed (0xffffff80083703d0)
[ 0.558245] rk-vcodec vpu_combo: failed on clk_get clk_cabac
[ 0.567231] rk-vcodec vpu_combo: could not find power_model node
[ 0.590217] rockchip-drm display-subsystem: failed to bind ff450000.dsi (ops 0xffffff8008874e78): -517
[ 0.603239] panel-simple-dsi ff450000.dsi.0: failed to get power regulator: -517
[ 0.611221] mali ff400000.gpu: Failed to get regulator
[ 0.616388] mali ff400000.gpu: Power control initialization failed
[ 0.677208] rk817-battery rk817-battery: fb_temperature missing!
[ 0.683298] rk817-battery rk817-battery: energy_mode missing!
[ 0.689081] rk817-battery rk817-battery: zero_reserve_dsoc missing!
[ 0.719985] rk817-charger rk817-charger: power_dc2otg missing!
[ 0.725890] rk817-charger rk817-charger: otg5v_suspend_enable missing!
[ 0.757268] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
[ 0.787477] cpu cpu0: failed to find power_model node
[ 0.869911] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[ 0.878785] rksfc_base v1.1 2016-01-08
[ 0.894139] rockchip-drm display-subsystem: failed to bind ff450000.dsi (ops 0xffffff8008874e78): -517
[ 0.904565] panel-simple-dsi ff450000.dsi.0: actual backlight_supply exists
[ 0.912777] mali ff400000.gpu: Failed to get leakage
[ 0.924493] rockchip-dmc dmc: Failed to get leakage
[ 0.930166] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 0.936640] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 0.947237] devfreq dmc: Couldn’t update frequency transition information.
[ 0.957445] asoc-simple-card rk817-sound: ASoC: no sink widget found for MIC_IN
[ 0.964761] asoc-simple-card rk817-sound: ASoC: Failed to add route Mic Jack -> direct -> MIC_IN
[ 0.973550] asoc-simple-card rk817-sound: ASoC: no source widget found for HPOL
[ 0.980859] asoc-simple-card rk817-sound: ASoC: Failed to add route HPOL -> direct -> Headphone Jack
[ 0.989987] asoc-simple-card rk817-sound: ASoC: no source widget found for HPOR
[ 0.997312] asoc-simple-card rk817-sound: ASoC: Failed to add route HPOR -> direct -> Headphone Jack
[ 1.009286] get_framebuffer_by_node: failed to get logo,offset
[ 1.015181] rockchip-drm display-subsystem: failed to show loader logo
[ 1.022373] /dsi@ff450000/panel@0/display-timings: could not find phandle
[ 1.022953] devfreq ff400000.gpu: Couldn’t update frequency transition information.
e2fsck 1.45.3 (14-Jul-2019)
root: clean, 166643/622592 files, 1632285/2470707 blocks
[ 2.579163] cgroup: cgroup2: unknown option “nsdelegate”
[ 3.062827] systemd[1]: systemd-journald.socket: Socket service systemd-journald.service not loaded, refusing.
[ 3.072868] systemd[1]: Failed to listen on Journal Socket.
[FAILED] Failed to listen on Journal Socket.
See ‘systemctl status systemd-journald.socket’ for details.
Starting Create list of re…odes for the current kernel…
Starting Load Kernel Modules…
Starting Set the console keyboard layout…
[ 3.104970] systemd[1]: systemd-journald-dev-log.socket: Socket service systemd-journald.service not loaded, refusing.
[ 3.121171] systemd[1]: Failed to listen on Journal Socket (/dev/log).
[FAILED] Failed to listen on Journal Socket (/dev/log).
See ‘systemctl status systemd-journald-dev-log.socket’ for details.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ OK ] Created slice system-systemd\x2dfsck.slice.
Starting udev Coldplug all Devices…
Mounting Kernel Debug File System…
Starting Remount Root and Kernel File Systems…
[ OK ] Started Create list of req… nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted Kernel Debug File System.
Mounting FUSE Control File System…
Mounting Kernel Configuration File System…
Starting Apply Kernel Variables…
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
Starting Create System Users…
Starting Load/Save Random Seed…
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create System Users.
Starting Create Static Device Nodes in /dev…
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager…
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Set the console keyboard layout.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started udev Kernel Device Manager.
Starting Show Plymouth Boot Screen…
[ 3.606261] /dsi@ff450000/panel@0/display-timings: could not find phandle
Ubuntu 19.10 rg351mp ttyFIQ0
rg351mp login: ark
Password:
Last login: Sun Mar 23 23:35:59 CET 2025 from 192.168.69.4 on pts/0
Welcome to ArkOS 2.0 (02092025)(AeUX)
Based on Ubuntu 19.10 (GNU/Linux 4.4.189 aarch64)
- ArkOS Documentation: https://github.com/christianhaitian/arkos/wiki
- Ubuntu 19.10 Docs: https://wiki.ubuntu.com/EoanErmine/ReleaseNotes
- Ubuntu Documentation: https://help.ubuntu.com
- Ubuntu Management: https://landscape.canonical.com
- Ubuntu Support: https://ubuntu.com/advantage
ark@rg351mp:$ uname -a$
Linux rg351mp 4.4.189 #3 SMP Wed Oct 13 23:24:26 EDT 2021 aarch64 aarch64 aarch64 GNU/Linux
ark@rg351mp:
reading rg351mp-kernel.dtb
reading boot.ini
reading Image
reading uInitrd
reading rk3326-r35s-linux.dtb
https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf
Hit key to stop autoboot(‘CTRL+C’): 0
Para hacer scroll:
Ctrl-a Esc